Chord Electronics ULTIMA 7 – New Class G Stereo Power Amplifier with ULTIMA Technology Available Now
The Chord Electronics ULTIMA 7 is a stereo power amplifier that pairs a Class G output stage with the company's Dual Feed Forward error correction. It delivers 2 × 140 watts into 8 ohms and 2 × 250 watts into 4 ohms, with short-term reserves of more than 1,000 watts according to the manufacturer. Our report covers the design thinking behind the amplifier, its compact passive-cooled chassis and its pairing with the ULTIMA PRE 3.
- The Chord Electronics ULTIMA 7 is the first Chord Electronics amplifier to use Class G circuitry, combining it with vertical high-current MOSFETs, a fully balanced layout and Dual Feed Forward error correction to deliver 2 × 140 watts into 8 ohms from a fanless, 14,45 kg chassis. It is available now in Jett Black or Argent Silver at a recommended price of € 8.250,- with a five-year manufacturer's warranty and distribution in Germany handled by Drei H Vertriebs GmbH.
Chord Electronics Ltd. has added a distinctly new chapter to its ULTIMA Series with the Chord Electronics ULTIMA 7. The stereo power amplifier was first shown at HIGH END Vienna 2026 in June and was originally pencilled in for a September launch. In the event, the official market introduction came only in November. Far from being one more model slotted into an existing line-up, the ULTIMA 7 is the first Chord Electronics amplifier built around a Class G circuit, which the company combines with its in-house Dual Feed Forward technology in pursuit of particularly efficient power delivery.
Key Facts – Chord Electronics ULTIMA 7
- Stereo power amplifier, successor to the Chord Electronics ULTIMA 6
- First Chord Electronics amplifier with Class G technology
- Proprietary ULTIMA Dual Feed Forward error correction
- 2 × 140 watts into 8 ohms and 2 × 250 watts into 4 ohms
- Short-term power reserves of more than 1.000 watts, according to the manufacturer
- Vertical high-current MOSFETs and a fully balanced circuit concept
- Balanced XLR and unbalanced RCA inputs
- Aluminium chassis, dimensioned to match the Chord Electronics ULTIMA PRE 3
- Available in Jett Black and Argent Silver
- Premiered at HIGH END Vienna 2026, on sale since November 2026
A successor that changes the brief
The ULTIMA range has long been one of Chord Electronics’ central product families, known for its independent circuit thinking, generous power reserves and unmistakable styling. With the ULTIMA 7, the designers are chasing something other than the biggest possible output figure. Efficiency of the amplifier circuit itself now sits at the centre of the concept.
The amplifier was developed by company founder and chief designer John Franks, who has shaped the firm’s analogue amplifier designs from the start. It takes over directly from the ULTIMA 6 and is positioned as the most affordable way into the full-width ULTIMA stereo power amplifiers.
One detail stands out immediately: at 2 × 140 watts into 8 ohms, the new model’s nominal continuous output is lower than its predecessor’s. Chord Electronics has opted instead for a different balance between power reserves, energy efficiency, thermal behaviour and physical size.
Rated power and reserves, kept apart
According to current manufacturer figures, the ULTIMA 7 delivers 2 × 140 watts continuously into 8 ohms and 2 × 250 watts into 4 ohms. Chord Electronics also points to short-term reserves of more than 1,000 watts, intended for dynamic peaks and demanding speaker loads.
The two figures should not be confused. The continuous rating describes what the amplifier can sustain, whilst the reserve figure refers to what is available briefly, and it underlines the maker’s claim that even awkward loads can be driven with firm control.
A fully balanced amplifier circuit and a purpose-designed switch-mode power supply form the technical foundation. The new architecture is also what allowed the company to build a noticeably smaller and lighter chassis than the previous generation.
Class G: supply rails that follow the music
The most significant technical change in the ULTIMA 7 is its Class G output stage. Where classic Class A/B designs run from fixed supply voltages, Class G offers several, and the circuit selects between them according to what the music signal demands at any given moment.
When power requirements are modest, the amplifier works from a lower rail. Larger dynamic demands bring in higher voltage reserves. The result is less power dissipated as heat, without giving up the headroom that dynamic passages call for.
Chord Electronics pairs this with specially designed vertical high-current MOSFETs. The groundwork stems from the company’s professional ULTIMA PRO 250 amplifier platform, where high output and compact construction were likewise essential requirements.
The manufacturer says the new circuit should cut heat generation considerably. The amplifier therefore needs no active fan cooling and is meant to remain dependable even with demanding speaker loads.
Dual Feed Forward takes on a second job
The proprietary Dual Feed Forward error correction, a feature of the whole ULTIMA family, carries over to the ULTIMA 7. It was developed to suppress distortion within the amplifier circuit as effectively as possible.
Here it has an added duty. A well-known challenge with Class G is making the hand-over between supply voltages as clean as possible. By combining the latest generation of Dual Feed Forward with the Class G architecture, Chord Electronics says even the smallest irregularities at those transitions are corrected.
The company expects this to yield low distortion, very fast impulse response and precise control of connected speakers. It also highlights the amplifier’s high damping factor, which should support controlled reproduction with demanding loudspeaker designs.
Smaller, lighter and silent in operation
Visually, the ULTIMA 7 stays true to the British brand’s design language. The precision-machined aluminium chassis carries prominent heat-sink fins on its flanks, Chord Electronics’ characteristic controls and an illuminated power switch.
The case measures 480 mm wide, 132 mm high including the Integra feet and 382 mm deep, which is comparatively compact for a power amplifier of this class. At 14,45 kg, it weighs markedly less than the ULTIMA 6.
Purely passive cooling through the aluminium body allows fanless running. That makes the amplifier an option for high-quality installations where intrusive operating noise would be unwelcome.
As alternatives to the standard Integra feet, side-mounted acrylic blocks are available. The amplifier comes in the two familiar finishes of Jett Black and Argent Silver.
Fitting into the system
The rear panel provides both balanced XLR and unbalanced RCA inputs, so the amplifier can be used with a wide range of preamplifiers. The Chord Electronics ULTIMA PRE 3 is nonetheless the obvious partner: the two components share a matched height and form a visually unified preamplifier and power amplifier combination.
Speakers connect via high-quality gold-plated terminals. 12 V trigger connections allow automated switching on and off in conjunction with other components.
From Vienna preview to dealers
Chord Electronics used HIGH END in early June 2026, held in Vienna for the first time, to show the ULTIMA 7 to an international trade audience, together with the likewise announced Chord Electronics Blade. That was explicitly a preview. A regular launch was promised for September 2026, with detailed specifications and prices to follow at the official start of sales.
In August the company already firmed up key technical points, notably the Class G circuit and the output power. The final launch slipped to November, and the amplifier is now arriving with dealers.
All benefits at a glance
- New amplifier architecture: the first time Chord Electronics has joined ULTIMA technology to a Class G concept.
- Cooler running: drawing on different supply voltages as needed is intended to reduce power loss and heat.
- Clean signal handling: Dual Feed Forward error correction is designed to minimise distortion and keep impulse response quick.
- Dynamic headroom: short-term reserves above 1.000 watts leave room for difficult speaker loads.
- Slimmer construction: a clear weight saving over the ULTIMA 6 with no compromise in the brand’s build quality.
- Easy integration: XLR and RCA inputs suit a variety of preamplifiers.
- Matched design: the height is tuned to the ULTIMA PRE 3 for a cohesive pairing.
- Lower entry price: a more affordable route into full-size ULTIMA amplification.
Price and availability
The Chord Electronics ULTIMA 7 is in specialist shops now, in Jett Black and Argent Silver. In Germany, distribution is through Drei H Vertriebs GmbH. Chord Electronics provides a five-year manufacturer’s warranty on the new stereo power amplifier. The recommended retail price is € 8.250,-.
Getting to the point
With the ULTIMA 7, British specialist Chord Electronics Ltd. takes a notably different path. Rather than simply refining its earlier amplifier architecture and quoting bigger power figures, it has started from a fresh concept that sets out to combine efficiency, compact construction and large dynamic reserves. The pairing of Class G with the established ULTIMA Dual Feed Forward technology is a distinctive technical approach in its own right. The Chord Electronics ULTIMA 7 should interest existing followers of the brand, but also demanding HiFi enthusiasts looking for a powerful yet relatively compact amplifier.
| Product | Chord Electronics ULTIMA 7 |
|---|---|
| Price | € 8.250,- |
Technical Specifications
| Product | Chord Electronics ULTIMA 7 |
|---|---|
| Characterisation | Stereo power amplifier |
| Amplifier principle | Class G |
| Circuit | Fully balanced, Dual Feed Forward error correction |
| Output stage | Vertical high-current MOSFETs |
| Output power at 8 ohms | 2 × 140 watts |
| Output power at 4 ohms | 2 × 250 watts |
| Short-term power reserve | Over 1.000 watts, according to the manufacturer |
| Frequency response | 5 Hz to 25 kHz |
| Total harmonic distortion | 0.015 % |
| Signal-to-noise ratio | 105 dB |
| Channel separation | 98 dB |
| Input impedance | 47 kOhm |
| Input sensitivity | 3 V |
| Analogue inputs | 1 × stereo XLR, 1 × stereo RCA |
| Speaker outputs | Gold-plated terminals |
| Control | 12 V trigger input and output |
| Power supply | Switch-mode |
| Cooling | Passive, fanless |
| Power consumption | 20 watts idle, 10 watts standby |
| Chassis | Aluminium |
| Finishes | Jett Black, Argent Silver |
| Dimensions (W × H × D) | 480 × 132 × 382 mm |
| Weight | 14,45 kg |
| Warranty | 5 years |
| Brand | Chord Electronics Ltd. |
|---|---|
| Manufacturer | Chord Electronics Ltd. |
| Distribution | Drei H Vertriebs GmbH |
| More about this manufacturer at HiFi BLOG |










