DAC & Headphone AmpsMobile AudioNewsPersonal Audio

FiiO BTR25 – Portable Bluetooth DAC and Headphone Amplifier with Bluetooth 6.2

FiiO's new BTR25 is a pocket-sized Bluetooth receiver that is also a wired USB DAC, built around a Qualcomm QCC3095 chipset, an ESS ES9069Q converter and two ESS ES9603Q amplifiers. It offers aptX Lossless, LDAC and LE Audio, a 4.4 mm Pentaconn output rated at up to 570 mW per channel into 16 Ohm, and a ten-band parametric equaliser. We look at how the pieces fit together and who the little device is aimed at.

Story Highlights
  • The FiiO BTR25 Portable Bluetooth DAC and Headphone Amplifier lets owners of wired in-ear and over-ear headphones use them wirelessly or via USB-C, with Bluetooth 6.2, aptX Lossless, LDAC and LE Audio on the wireless side and a balanced 4,4 mm output delivering up to 570 mW per channel into 16 Ohm, according to FiiO. A global ten-band parametric equaliser, a 1.3-inch colour display and a removable magnetic clip complete the package, which is already listed by European specialist retailers at € 119,90 in Black, Vintage Gold and Gradient Green.

Owning a fine pair of wired headphones no longer means going without the conveniences of wireless audio. With the BTR25, Guangzhou FiiO Electronics Technology Co. Ltd. adds the newest member to its BTR range of compact receivers: a device that works as a Bluetooth receiver, but just as readily as an external DAC and headphone amplifier for a smartphone or computer. What sets it apart, on paper at least, is the pairing of current Bluetooth technology with a self-contained DAC and amplifier design, which FiiO says gives this tiny unit considerable power in reserve.


Key Facts – FiiO BTR25 Portable Bluetooth DAC and Headphone Amplifier

  • Portable Bluetooth DAC and headphone amplifier with three operating modes
  • Qualcomm QCC3095 Bluetooth chipset supporting Bluetooth 6.2
  • aptX Lossless, aptX Adaptive, aptX HD, LDAC and LE Audio with LC3
  • ESS ES9069Q DAC based on fourth-generation HyperStream architecture
  • Two ESS ES9603Q headphone amplifiers
  • Balanced 4,4 mm Pentaconn and single-ended 3,5 mm stereo mini-jack outputs
  • Up to 570 mW per channel into 16 Ohm from the balanced output
  • USB DAC for linear PCM up to 32 bit and 384 kHz, plus DSD256
  • Global ten-band parametric equaliser for Bluetooth and USB playback
  • 1.3-inch IPS colour display and removable magnetic clip

A wired-headphone upgrade that happens to be wireless

The BTR25 widens FiiO’s line-up of portable DACs and headphone amplifiers with a model that is flexible both in how it connects and in what it can plug into. It is aimed chiefly at people who own good in-ear monitors or traditional wired headphones but do not want to tie them to a desktop HiFi system.

The division of labour is straightforward. The BTR25 handles digital conversion and amplification; the smartphone, tablet or computer is reduced to a source of music. Depending on the situation, the link is either wireless over Bluetooth or wired over USB-C. That pairing is what makes the little device appealing as an add-on for headphones people already own, since their familiar sound is left intact.

Three modes for three situations

A slide switch on the casing selects between PC, BT and PHONE, and the choice decides both where the audio comes from and where the power comes from.

In PC mode the BTR25 acts as an external USB DAC and headphone amplifier for a computer. It draws its power from the USB port, so the internal battery is not touched.

BT mode turns it into a wireless receiver. Here it normally runs from its own battery.

PHONE mode is for use as a USB DAC with a smartphone or tablet. In this case an intelligent power-management system shares the load, with the internal battery supplying part of the current. The purpose, FiiO says, is to spare the battery of the connected mobile device.

For USB audio the BTR25 relies on an SPV5048 controller. It handles linear PCM up to 32 bit and 384 kHz and DSD up to and including DSD256, which gives the wired connection proper high-resolution credentials.

Power in reserve: the amplifier stage and its outputs

FiiO has paid particular attention to low distortion, low self-noise and a stable power supply, according to the company. Separate voltage regulation for different functional blocks and an amplifier circuit tuned for low-impedance loads are meant to help here.

Two ESS ES9603Q headphone amplifiers work in a fully differential signal architecture. Through the balanced 4,4 mm Pentaconn output the BTR25 delivers up to 570 mW per channel into 16 Ohm and 460 mW per channel into 32 Ohm. The single-ended 3,5 mm stereo mini-jack is specified at 210 mW per channel into 16 Ohm and 125 mW per channel into 32 Ohm.

Those figures suggest the BTR25 is not merely for sensitive in-ear monitors, and FiiO positions it as having enough reserves for a good number of more demanding headphones too. An output impedance below 0,3 Ohm is intended to keep interaction between amplifier and headphones to a minimum, which matters most with multi-driver in-ear monitors.

The converter: ESS ES9069Q

Digital-to-analogue conversion is entrusted to an ESS ES9069Q, which is based on the fourth generation of ESS’s HyperStream architecture. The two ES9603Q amplifiers described above sit behind it, so the signal path from converter to headphone output is largely self-contained.

Wireless: Bluetooth 6.2, aptX Lossless and LE Audio

On the wireless side the foundation is a Qualcomm QCC3095 chipset. FiiO states that it supports Bluetooth 6.2, and it carries two Kalimba Audio DSPs, each running at 240 MHz. This makes current transmission technologies available, with high-quality music playback in mind.

The codec list is long: Qualcomm Snapdragon Sound and aptX Lossless, along with aptX, aptX LL, aptX HD, aptX Adaptive and LDAC. Bluetooth LE Audio, including LC3, is on board as well, so the newer generation of Bluetooth audio is covered too.

aptX Lossless can, under suitable conditions, carry audio in CD quality without loss. The caveat is that the source device must support it as well. LDAC, for its part, is an established codec for transmitting high-resolution audio.

Tailoring the sound: ten-band parametric equaliser

The BTR25 includes a global ten-band parametric equaliser that works for Bluetooth playback and when used as a USB DAC alike. Frequency, level and bandwidth of every filter can be set via the FiiO Control app or a web-based interface, so listeners can adapt the sound to their headphones and personal taste.

An Auto-EQ function, or a corresponding interface, is also available. This could prove useful with in-ear monitors, whose tuning can change noticeably depending on construction and the ear tips fitted.

Display, controls and magnetic clip

Despite its mobile focus, the BTR25 does not stint on user interface. A 1.3-inch IPS colour display reports the operating status, the transmission format in use, the sampling rate, the volume and other settings. Track information can be shown during Bluetooth playback.

Control is via physical buttons and a rotary dial, which handles volume among other things. Two volume curves are offered, with 60 or 120 steps.

The aluminium-alloy casing measures roughly 72 × 35 × 13,7 mm without the clip and weighs about 46 g. A removable magnetic clip lets the BTR25 be fastened to clothing, or attached directly to a smartphone with a suitable magnetic mount.

The device comes in three colours: Black, Vintage Gold and Gradient Green.

Extras for everyday use

FiiO has thought about uses beyond straightforward music playback. A UAC 1.0 mode allows operation with compatible devices such as the Nintendo Switch, and a dedicated gaming mode additionally supports USB microphones for voice chat.

For calls there is an integrated microphone, and the 3,5 mm socket works with compatible headsets using CTIA wiring. A car mode switches the BTR25 on and off automatically when the vehicle’s power supply does so.

Battery life, according to the detailed data sheet, is at least 9.5 hours of Bluetooth playback over SBC and 8,5 hours with LDAC. In PHONE mode FiiO quotes at least 11 hours under defined test conditions. A full charge should take no more than 1,5 hours.


All benefits at a glance

  • Up-to-date wireless: Bluetooth 6.2 with aptX Lossless, LDAC and LE Audio gives wired headphones a modern wireless connection.
  • Own audio architecture: an ESS DAC feeding dedicated headphone amplifiers keeps the signal path self-contained.
  • Generous reserves: the balanced output also copes with more demanding headphones.
  • Versatile USB use: the BTR25 serves as an external DAC for computers, smartphones and tablets.
  • Personal tuning: a ten-band parametric equaliser lets users tailor playback to different headphones.
  • Built for mobility: compact dimensions, a colour display and a magnetic clip make daily use easier.
  • Flexible power: the operating modes match power management to the source in use.

Price and availability

The new FiiO BTR25 Portable Bluetooth DAC and Headphone Amplifier is already listed by European specialist retailers and is due to be offered in Black, Vintage Gold and Gradient Green. The recommended or currently stated retail price in the German specialist trade is € 119,90. At the time of research, the black version was marked as out of stock in the FiiO shop for Germany.

Getting to the point

The FiiO BTR25 shows once more how much equipment a compact mobile DAC and headphone amplifier can now carry. What appeals most is the combination of current Bluetooth technology with a capable amplifier design, because it lets good wired headphones be used comfortably in very different situations. That FiiO has also added a parametric equaliser, a versatile USB DAC mode and sensible controls makes the BTR25 an interesting proposition for demanding personal audio.

ProductFiiO BTR25 Portable Bluetooth DAC and Headphone Amplifier
Price€ 119,90

Technical Specifications

ProductFiiO BTR25
CharacterisationPortable Bluetooth DAC and headphone amplifier
Bluetooth chipsetQualcomm QCC3095
Bluetooth versionBluetooth 6.2
Bluetooth codecsSBC, LC3, aptX, aptX LL, aptX HD, aptX Adaptive, aptX Lossless, LDAC
Other wireless technologiesQualcomm Snapdragon Sound, Bluetooth LE Audio
DAC1 × ESS ES9069Q
Headphone amplifiers2 × ESS ES9603Q
USB audio controllerSPV5048
Audio formats over USBLinear PCM up to 32 bit and 384 kHz, DSD256
Headphone outputs3,5 mm stereo mini-jack, 4.4 mm Pentaconn
Output power, 3.5 mm2 × 210 mW into 16 Ohm, 2 × 125 mW into 32 Ohm
Output power, 4.4 mm2 × 570 mW into 16 Ohm, 2 × 460 mW into 32 Ohm
Output impedanceBelow 0.3 Ohm
Signal-to-noise ratioUp to 124 dB
EqualiserParametric ten-band EQ
Display1.3-inch IPS colour display
Operating modesPC, Bluetooth, PHONE, UAC 1.0, Gaming, Car
USB portUSB-C
Battery lifeAt least 9,5 hours with SBC, 8,5 hours with LDAC; 11 hours in PHONE mode under stated test conditions
Charging timeMaximum 1.5 hours
CasingAluminium alloy
Dimensions72 × 35 × 13,7 mm without clip
WeightApprox. 46 g without clip
ColoursBlack, Vintage Gold, Gradient Green
BrandGuangzhou FiiO Electronics Technology Co. Ltd.
ManufacturerFiiO
DistributionNT Global Distribution GmbH
More about this manufacturer at HiFi BLOG

Michael Holzinger

Michael Holzinger, founder and editor-in-chief of HiFi BLOG and sempre-audio.at, has been working for years as a journalist in the fields of IT, photography, telecommunications and consumer electronics.

Related Articles

Leave a Reply

Back to top button